Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Turn the ignition switch to RUN.
- Hold the washer switch in the ON position.
|
| • | The wipers operate at LO speed. |
| • | The washer sprays the windshield as long as the washer switch
is held in the ON position. |
| • | After releasing the switch, the washer stops and the wipers
return to the park position after 2-4 sweeps. |
|
|
2
| Turn the wiper switch to DELAY (pulse mode).
|
| • | The wipers make one complete sweep, then pause for 1-22 seconds
before making the next sweep. |
| • | The pause time is adjusted by turning the wiper switch through
the delay range. |
|
|
3
|
- Turn the wiper switch to DELAY.
- Hold the wiper switch ON for 1-2 seconds.
|
| • | The washer sprays as long as the washer switch is held ON. |
| • | The wipers run at low speed during spray period and continue
for 2-4 sweeps after the washer switch is released. |
| • | The wipers then return to pulse operation. |
|
|
4
| Turn the wiper switch to LO.
| The wipers run continuously
at low speed.
|
Wipers Mist, Delay, and Low Modes Inoperative
|
5
| Turn
the wiper switch to HI.
| The wipers run continuously at high speed.
|
Wipers High Mode Inoperative, Low Mode Operates
|
6
| Turn the wiper switch to OFF.
| The wipers return
to the park position at low speed.
|
|
7
| Turn the wiper switch to MIST, then release.
| The wipers make one complete sweep, then return
to the park position.
|
Wipers Mist, Delay, and Low Modes Inoperative
|
