Engine Mount Strut Bracket Replacement - Upper Radiator Support. Chevrolet Impala 2002

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2002 🢒 Impala 🢒 Engine 🢒 Engine Mechanical - 3.8L 🢒 Engine Mount Strut Bracket Replacement - Upper Radiator Support

Removal Procedure

Remove the engine mount struts from the engine mount strut brackets at the upper radiator support. Refer to Engine Mount Strut Replacement - Right Side and/or Engine Mount Strut Replacement - Left Side .

Remove the four bolts from the engine mount strut bracket to the upper radiator support.
Remove the engine mount strut bracket from the upper radiator support.

Installation Procedure

Position the engine mount strut bracket over the upper radiator support so the engine mount strut bracket and the engine mount strut are aligned. Align the engine mount strut bracket with the proper holes of the upper radiator support.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Install the four bolts through the engine mount strut bracket to the upper radiator support.

Tighten
Tighten the engine mount strut bracket bolts at the upper radiator support to 28 N·m (21 lb ft).

Install the engine mount struts to the engine mount strut brackets at the upper radiator support. Refer to Engine Mount Strut Replacement - Right Side and/or Engine Mount Strut Replacement - Left Side .