Application | Specification | |
---|---|---|
Metric | English | |
Accelerator Cable Bracket Retaining Bolts | 10 N·m | 89 lb in |
Accelerator Control Pedal Bolt and Stud | 3 N·m | 27 lb in |
Air Cleaner Assembly Screws | 4 N·m | 35 lb in |
Air Cleaner Duct Clamps | 2 N·m | 18 lb in |
Camshaft Position (CMP) Sensor Retaining Bolt | 10 N·m | 89 lb in |
Crankshaft Position (CKP) Sensor Bolts | 30 N·m | 22 lb ft |
EGR Valve Adapter Pipe Stud | 50 N·m | 37 lb ft |
EGR Valve Intake Pipe to Exhaust Manifold Bolt | 30 N·m | 22 lb ft |
EGR Valve Outlet Pipe to Adapter Nut | 30 N·m | 22 lb ft |
EGR Valve Outlet Pipe to Intake Manifold Bolt | 30 N·m | 22 lb ft |
EGR Valve to Retaining Nuts | 30 N·m | 22 lb ft |
Engine Coolant Temperature (ECT) Sensor | 20 N·m | 15 lb ft |
Fuel Filler Neck Bolts | 2 N·m | 18 lb in |
Fuel Rail Attaching Nuts or Bolts | 10 N·m | 89 lb in |
Fuel Rail Hold-Down Stud | 25 N·m | 18 lb ft |
Fuel Sender Access Panel Nuts | 10 N·m | 89 lb in |
Fuel Tank Filler Pipe Attaching Screw | 2.5 N·m | 22 lb in |
Fuel Tank Filler Pipe Hose Clamp | 2.5 N·m | 22 lb in |
Fuel Tank Retaining Strap Bolts | 47 N·m | 35 lb ft |
Heated Oxygen Sensors | 41 N·m | 30 lb ft |
Idle Air Control Valve Attaching Screws | 3 N·m | 27 lb in |
Ignition Coil to Ignition Control Module Screws | 4.5 N·m | 40 lb in |
Ignition Control Module 14-Way Connector to Module Bolt | 2.1 N·m | 19 lb in |
In-Line Fuel Filter Mounting Bracket Bolt | 20 N·m | 15 lb ft |
In-Line Fuel Filter Outlet Nut | 30 N·m | 22 lb ft |
Knock Sensor | 19 N·m | 14 lb in |
Knock Sensor Heat Shield Bolts | 60 N·m | 44 lb ft |
Manifold Absolute Pressure (MAP) Sensor Retaining Screw | 5 N·m | 44 lb in |
Mass Air Flow (MAF) Sensor Attaching Screws | 3 N·m | 27 lb in |
Powertrain Control Module (PCM) Bolts | 8 N·m | 71 lb in |
Secondary Air Injection Manifold Pipe Fasteners | 9 N·m | 80 lb in |
Secondary Air Injection Pump Bracket Fasteners | 10 N·m | 89 lb ft |
Secondary Air Injection Shut-Off Valve Bracket Fasteners | 9 N·m | 80 lb in |
Spark Plug | ||
To a New Cylinder Head | 27N·m | 20 lb ft |
To an Existing Cylinder Head | 15N·m | 11 lb ft |
Throttle Body Retaining Nuts | 10 N·m | 89 lb in |
Throttle Body Support Bracket Bolts | 16 N·m | 12 lb ft |
Throttle Position Sensor Screws | 2 N·m | 18 lb in |
Secondary Air Injection Vacuum Control Solenoid Fastener | 10 N·m | 89 lb in |