Automatic Transmission Shift Lock Control Actuator Replacement Floor Shift

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
2. Remove the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.



3. Disconnect the automatic shift lock actuator electrical connector.



4. Remove the automatic shift lock actuator from the pivot point (1), the base of the shift lock control and the vehicle.

1. Install the automatic shift lock actuator to the base of the shift lock control and the pivot point (1).



2. Connect the automatic shift lock actuator electrical connector.
3. Install the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.

Automatic Transmission Shift Lock Control Actuator Replacement Column Shift

1. Remove the knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement in Instrument Panel, Gages, and Console.
2. Remove the shift lever actuator. Refer to Shift Lever Replacement - On Vehicle .
3. Disconnect the electrical connector from the automatic shift lock control actuator.
4. Remove the actuator from the steering column ball studs.

1. Install the automatic shift lock control actuator onto the steering column ball studs.
2. Connect the electrical connector to the actuator.
3. Install the shift lever actuator. Refer to Shift Lever Replacement - On Vehicle . Place the column in the neutral position.



4. Adjust the automatic shift lock control actuator.

•	Pull out the tab (1) on the adjuster block side (2) of the actuator.

•	Press on the adjuster block (2) in order to compress the internal adjuster spring and disengage the adjuster teeth. Slide the adjuster block as far away from the actuator as possible.

•	Lock in place by pushing in on the tab (1).

5. Inspect the actuator.

•	The actuator must lock the shift lever clevis when you place the clevis in the park position.

•	If you can move the shift lever without pressing on the brake pedal, readjust the actuator.

6. Install the knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement in Instrument Panel, Gages, and Console.