Air Conditioning Clutch Coil Removal V5 - Direct Mount

Tools Required

1. Install the compressor onto the J 41790-A .



2. Install the J 33023-A onto the front head of the compressor.
3. Remove the compressor clutch plate and hub assembly. Refer to Compressor Clutch Plate and Hub Assembly Removal .
4. Remove the compressor rotor and bearing assembly. Refer to Clutch Rotor and/or Bearing Removal .



5. Mark the clutch coil terminal location (2) on the compressor front head.
6. Install the J 33025 onto the J 8433 .
7. Install the J 8433 onto the compressor clutch coil (1) and tighten the puller leg bolts.
8. Tighten the center forcing screw J 8433-3 of the compressor pulley puller J 8433 against the puller pilot to remove the compressor clutch coil from the compressor.

Air Conditioning Clutch Coil Removal V5 -Conventional Mount

Tools Required

1. Remove the clutch plate and hub assembly. Refer to Compressor Clutch Plate and Hub Assembly Removal .
2. Use the J 6083 in order to remove the rotor and bearing assembly retaining ring.



3. Install the J 33023-A to the front head.



4. Install the J 33020 into the inner circle of slots in the rotor.
5. Turn the J 33020 clockwise in the slots in order to engage the tangs of the puller with the segments between the slots in the rotor.
6. Hold the J 33020 in place. Tighten the puller screw against the puller guide in order to remove the puller rotor and bearing assembly.



7. Mark the location of the clutch coil terminal (1) on the compressor front head.
8. Install the J 33023-A on the front head of the compressor.
9. Install the J 8433-1 and theJ 8433-3 with the J 33025 on the front head of the compressor.
10. Tighten the J 8433-3 against the J 33023-A in order to remove the clutch coil (2).