GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Position the windshield wipers in the UP position, by keying the ignition OFF when the wiper reach the desired position.
  2. Raise the hood.
  3. Position aside the rear hood seal halfway to the center. Refer to Hood Rear Seal Replacement in Body Front End.
  4. Remove the right recirculation grill. Refer to Air Inlet Grille Panel Replacement in Body Front End.

  5. Object Number: 296727  Size: SH
  6. Remove the passenger compartment air filter.

Installation Procedure


    Object Number: 296727  Size: SH
  1. Install the passenger compartment air filter.
  2. Install the recirculation grill. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  3. Install the rear hood seal. Refer to Hood Rear Seal Replacement in Body Front End.
  4. Close the hood.
  5. Return the windshield wipers to the PARK position.