GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Impala 🢒 Body and Accessories 🢒 Interior Trim 🢒 Sunshade Anchor Replacement

Removal Procedure

    Object Number: 301248 Size: SH
  1. Unhook the sunshade from the sunshade anchor.
  2. Remove the screw from the sunshade anchor.
  3. Remove the sunshade anchor from the roof.

Installation Procedure

    Object Number: 301248 Size: SH
  1. Position the sunshade anchor to the mounting position in the roof.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screw to the sunroof anchor.

    3. Tighten
    Tighten the sunroof anchor screw to 3 N·m (27 lb in).

  3. Reposition the sunshade to the original position.