Power Mirror Switch Replacement Impala

1. Remove the front door pull cup from the front door inner trim panel. Refer to Armrest Pull Cup Replacement .
2. Disconnect the electrical connectors from the power mirror switch.
3. Remove the power mirror switch from the front door pull cup, using a small flat-bladed tool at the side of the mirror switch in order to release the mirror control switch retainer.
4. Remove the power mirror switch from the front door pull cup.

1. Install the power mirror switch to the front door pull cup pressing into place until fully seated.
2. Connect the electrical connectors to the power mirror switch.
3. Install the front door pull cup to the front door trim panel. Refer to Armrest Pull Cup Replacement .

Power Mirror Switch Replacement Monte Carlo

1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .



2. Remove the armrest pull cup. Refer to Armrest Pull Cup Replacement .
3. Disconnect the power mirror switch by pressing the thumb tab retainers outward and remove the switch from the pull handle.

1. Install the power switch by pressing it into the pull handle.



2. Install the armrest pull cup. Refer to Armrest Pull Cup Replacement .
3. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .