GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Impala 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Windshield Wiper Motor Cover Replacement

Removal Procedure
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  2. Remove the wiper drive system module. Refer to Windshield Wiper System Module Replacement .

    3. Object Number: 334241 Size: SH
  3. Remove the wiper motor cover screws.
  4. Remove the wiper motor cover from the wiper motor.

Installation Procedure

    Object Number: 334241 Size: SH
  1. Position the wiper motor cover to the wiper motor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the wiper motor cover screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the wiper drive system module. Refer to Windshield Wiper System Module Replacement .
  4. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  5. Operate the windshield wipers and inspect for proper operation.