Backup Lamp Replacement Monte Carlo

1. Remove the screws from the backup lamp.
2. Remove the backup lamp from the rear bumper fascia.



3. Remove the backup lamp socket, turning counterclockwise.
4. Remove the backup lamp bulb from the socket.

1. Install the backup lamp bulb to the socket.
2. Install the backup lamp socket, turning clockwise.



3. Install the backup lamp to the rear bumper fascia.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the screws to the backup lamp.

Tighten
Tighten the backup lamp screws to 2 N·m (18 lb in).

Backup Lamp Replacement Impala

1. Open the rear compartment.
2. Remove the wing nuts from the studs on the rear compartment lid applique.
3. Remove the rear compartment lid applique from the rear compartment lid.
4. Remove the backup lamp sockets from the rear compartment lid applique, turning counterclockwise.
5. Remove the backup lamp bulbs from the sockets.

1. Install the backup lamp bulbs to the sockets.
2. Install the sockets to the backup lamp, turning clockwise.
3. Install the rear compartment lid applique to the rear compartment lid.
4. Install the wing nuts to the studs on the rear compartment lid applique and hand tighten.
5. Close the rear compartment.