Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
ABS Relay | -- | Commands the ABS relay ON and OFF. |
Automated Bleed | -- | Used in order to bleed the ABS hydraulics. Refer to Automated Bleed Procedure. |
Automated Test | -- | Cycles each solenoid valve and the pump motor in order to verify component operation. This test is identical to the Initialization Sequence. If a malfunction is detected, the EBCM will set the appropriate DTCs. The DTCs will be displayed upon completion of the test. |
LF Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
LF Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
LR Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
LR Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
RF Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
RF Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
RR Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
RR Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
TIM Reset | -- | Used in order to reset the tire inflation monitor. |
