For 1990-2009 cars only
Important: The following must be completed before using the symptom tables.
- Perform Diagnostic System Check - Power Sunroof in order to verify that all of the following are true:
- Review the system operation in order to familiarize yourself with the system functions. Refer to Sunroof Description and Operation .
| • | There are no DTCs set. |
| • | The control module(s) can communicate via the serial data link. |
Visual/Physical Inspection
| • | Inspect for aftermarket devices which could affect the operation of the Power Sunroof system. Refer to Checking Aftermarket Accessories in Wiring Systems. |
| • | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. Refer to Sunroof Window Height and Opening Fit Adjustment . |
| • | Inspect the RETAINED ACCSRY PWR BRKR 30 A circuit breaker for obvious damage or conditions which could affect the operation of the Power Sunroof system. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
| • | Retained Accessory Power (RAP) On After Timeout in Retained Accessory Power, if the power sunroof should operate for more than 10 minutes after the ignition has been turned OFF. |
