Tools Required

J 38778 Door Trim Pad Clip Remover

1. Use J 38778 in order to remove the push-in retainer.
2. Release the insulator retainers from the lower I/P trim pad. Lower the insulator.
3. Rotate the courtesy lamp socket counterclockwise. Remove socket from the insulator.
4. Remove the insulator.

1. Insert the courtesy lamp socket to the insulator opening. Rotate the socket clockwise.
2. Align and install the insulator with the push-in the retainer.
3. Lift upward on the insulator. Install the insulator retainers to the lower /IP trim pad openings.