-
Rear Sidemarker Lamp
Taillamps/Turn Signal and Stoplamp
- Open the trunk. Remove the convenience net, if your vehicle has one. Unhook the net from the upper wing nut.
- Remove the two upper (convenience net) wing nuts.
- Pull the carpet away from the rear of the vehicle.
- Unscrew the two remaining wing nuts.
- Pull the assembly from the body carefully.
- To remove a socket, press the tab, turn the socket counterclockwise and pull it out.
- Pull the old bulb out. Do not twist it.
- Push the new bulb into the socket.
- Reinstall the socket in the assembly. Tighten the socket by turning it clockwise.
- Reinstall the assembly and the two lower wing nuts.
- Reinstall the carpeting.
- Reinstall the upper (convenience net) wing nut and convenience net, if equipped.