Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Retained Accessory Power (RAP) Schematics Connector End View Reference: Master Electrical Component List in Wiring Systems | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 |
Do the sunroof and the power windows operate? | Go to Step 3 | Go to Step 4 |
3 | Repair the short to battery in the power windows, radio and sunroof feed circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 7 | -- |
4 | Using a test lamp connected to a good ground, probe the RAP relay control circuit. Does the test lamp illuminate? | Go to Step 6 | Go to Step 5 |
5 | Replace the RAP relay. Did you complete the replacement? | Go to Step 7 | -- |
6 | Replace the body control module (BCM). Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
