Callout | Description | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Vehicle Certification Label The vehicle certification label is located on the driver door and displays the following assessments:
| |||||||||||||||
1 | Name of Manufacturer | ||||||||||||||
2 | Gross Vehicle Weight Rating | ||||||||||||||
3 | Gross Axle Weight Rating (Front, Rear) | ||||||||||||||
4 | Canadian Safety Mark (w/RPO Z49) | ||||||||||||||
5 | Certification Statement | ||||||||||||||
6 | Vehicle Class Type (Pass Car, etc.) | ||||||||||||||
7 | Vehicle Identification Number | ||||||||||||||
8 | Date of Manufacture (Mo/Yr) | ||||||||||||||
Tire Placard The tire placard label is located on the driver door and displays the following assessments:
| |||||||||||||||
9 | Specified Occupant Seating Positions | ||||||||||||||
10 | Total Occupant Seating | ||||||||||||||
11 | Maximum Vehicle Capacity Weight | ||||||||||||||
12 | Tire pressure, Front, Rear, and Spare | ||||||||||||||
13 | Tire Speed Rating, Front, Rear, and Spare | ||||||||||||||
14 | Tire Label Code | ||||||||||||||
15 | Engineering Model Minus First Character | ||||||||||||||
16 | Tire Size, Front, Rear, and Spare | ||||||||||||||
17 | Vehicle Identification Number | ||||||||||||||
Service Parts ID Label The vehicle service parts identification label is located in the rear compartment under the spare tire cover. The label is use to help identify the vehicle original parts and options. | |||||||||||||||
18 | Vehicle Identification Number | ||||||||||||||
19 | Engineering Model Number (Vehicle Division, Line and Body Style) | ||||||||||||||
20 | Interior Trim Level and Decor | ||||||||||||||
21 | Exterior (Paint Color) WA Number | ||||||||||||||
22 | Paint Technology | ||||||||||||||
23 | Special Order Paint Colors and Numbers | ||||||||||||||
24 | Vehicle Option Content | ||||||||||||||
Anti-Theft Label | |||||||||||||||
25 | The Federal law requires that General Motors label certain body parts on this vehicle with the vehicle identification number (VIN). The purpose of the law is to reduce the number of motor vehicle thefts by helping in the tracing and recovery of parts from stolen vehicles. Labels are permanently affixed to an interior surface of the part. The label on the replacement part contains the letter R, the manufacturer's logo, and the DOT symbol. The anti-theft label must be covered before any painting, and rustproofing procedures, and uncovered after the procedures. Failure to follow the precautionary steps may result in liability for violation of the Federal Vehicle Theft Prevention Standard and possible suspicion to the owner that the part was stolen. |