GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Impala 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Compartment Replacement

Removal Procedure

    Object Number: 519555 Size: SH
  1. Lower the right insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Remove the screws from the instrument panel (I/P) compartment.
  3. Open the I/P compartment.
  4. Depress the side stops located on the sides of the I/P compartment.
  5. Carefully remove the I/P compartment.

Installation Procedure
  1. Align the I/P compartment to the opening.

    2. Depress the side stops located on the sides of the I/P compartment.

    Install the I/P compartment to the I/P compartment opening.

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 519555 Size: SH
  2. Install the I/P compartment screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Close the I/P compartment. Verify that the I/P compartment is properly aligned. Adjust the compartment as required.
  4. Install the right insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .