| Table 1: | Body Control Module |
| Table 2: | Instrument Panel Cluster |
| Table 3: | Powertrain Control Module |
The scan tool data lists contain all the instrument panel, gages, and console related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with the Diagnostic System Check - Vehicle in Vehicle DTC Information.
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Headlamps Off/Doors Closed/Trunk Closed/Park Brake Unapplied | |||
Driver Door Open Sw. | Inputs | Open/Closed | Closed |
Door Ajar Switches | Inputs | Open/Closed | Closed |
Headlamp Switch | Inputs | Active/Inactive | Inactive |
Key in Ignition | Inputs | Active/Inactive | Active |
Park Brake Switch | Inputs | On/Off | Off |
Parklamp Switch | Inputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Buckled/High Beams Off/Park Brake Unapplied | |||
ABS Warning Lamp | Inputs | On/Off | Off |
Air Bag Lamp | Inputs | On/Off | Off |
Brake Lamp | Inputs | On/Off | Off |
Cluster State | Module Information | Not Programmed/ Programmed | Programmed |
Cruise Lamp | Inputs | On/Off | Off |
English/Metric State | Module Information | English/Metric | varies |
Hi Beam Lamp | Inputs | On/Off | Off |
Hi Res. Speed Failed | Inputs | Yes/No | No |
Ignition 1 | Inputs | On/Off | On |
Left Turn Signal | Inputs | On/Off | Off |
Low Brake Fluid | Inputs | On/Off | Off |
Low Brake Fluid Report | Inputs | Yes/No | No |
Low Coolant Lamp | Inputs | On/Off | Off |
Low Fuel Indicator Off | Data | Percent | 23% |
Low Fuel Indicator On | Data | Percent | 13% |
Low Fuel Indicator Time | Data | Counts | 30 |
Low Res. Speed Failed | Inputs | Yes/No | No |
Low Washer Lamp | Inputs | On/Off | Off |
Odometer Msg. Failed | Inputs | Yes/No | No |
PROM ID | Module Information | Numeric | varies |
Right Turn Signal | Inputs | On/Off | Off |
Seat Belt Status | Inputs | Buckled/Unbuckled | Buckled |
Traction Off Lamp | Inputs | On/Off | Off |
Trip Reset Switch | Inputs | Active/Inactive | Inactive |
8 Digit Part Number | Module Information | Numeric | varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Engine Idling/Normal Operating Temperature | |||
ECT Sensor | Engine Data 1 Engine Data 2 EVAP Data | Celsius (Fahrenheit) | 85-105°C (185-220°F) |
Engine Oil Level Switch | Engine Data 2 | OK/Low | OK |
Engine Oil Life Remaining | Engine Data 2 | Percent | 0-100% (varies) |
Engine Oil Pressure Switch | Engine Data 2 | OK/Low | OK |
Engine Speed | Engine Data 1 Engine Data 2 EVAP Data | RPM | ±100 RPM from Desired Idle Speed |
Fuel Tank Level Remaining | EVAP Data | Percent | 0-100% (varies) |
Vehicle Speed Sensor | Engine Data 1 Engine Data 2 EVAP Data | kilometers per hour (miles per hour) | 0 km/h (0 mph) |
