Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Master Electrical Component List in Wiring Systems | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle In Vehicle DTC Information |
2 | Place the inside rear view mirror lamp switch in the ON position. Does the inside rear view mirror lamp operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Does the courtesy lamp function of the inoperative inside rear view mirror lamp operate properly? | Go to Step 4 | |
4 |
Does the test lamp illuminate? | Go to Step 6 | Go to Step 5 |
5 | Repair an open or high resistance in the ground circuit of the inside rear view mirror lamp switches. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you correct the condition? | Go to Step 7 | -- |
6 | Replace the inside rear view mirror. Refer to Inside Rearview Mirror Replacement in Stationary Windows. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
