GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Position the windshield wipers in the UP position, by keying the ignition OFF when the wiper reach the desired position.
  2. Raise the hood.
  3. Remove the rear hood seal. Refer to Hood Rear Seal Replacement .
  4. Remove the washer hose from the right air inlet grill panel and position aside.

  5. Object Number: 1203673  Size: SH
  6. Remove the two push pin retainers from the right air inlet grill panel.
  7. Important: Do not remove the third push pin retainer from the right air inlet grill panel

  8. Position the left side of the right air inlet grill panel on to the windshield.

  9. Object Number: 1203681  Size: SH
  10. Remove the passenger compartment air filter.

Installation Procedure


    Object Number: 1203681  Size: SH
  1. Install the passenger compartment air filter.

  2. Object Number: 1203673  Size: SH
  3. Install the left side of the right air inlet grill panel into position.
  4. Install the push pin retainers to the right air inlet grill panel.
  5. Position the washer hose in to the right air inlet grill panel clips.
  6. Install the rear hood seal. Refer to Hood Rear Seal Replacement .
  7. Close the hood.
  8. Return the windshield wipers to the PARK position.