Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .

1

Screw, Heater and A/C Control Assembly (Qty: 2)

TIP
Disconnect the HVAC control assembly electrical connector.

Tighten
1.5 N·m (13 lb in)

2

Control Assembly, Heater and Air Conditioning

Refer to Control Module References for programming and setup information.