Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the washer hose from the washer pump spout.
3. Remove the right fender liner. Refer to Front Fender Liner Replacement .
4. Drain the washer solvent into a suitable container.
5. Lower the vehicle.
6. Open the hood.
7. Remove the passenger side wiper arm. Refer to Windshield Wiper Arm Replacement .
8. Remove the passenger side air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

1

Windshield Washer Hose to Washer Pump Connection

2

Washer Pump Hose

Tip
Note the routing of the washer hose to the air inlet grille panel.

3

Windshield Washer Solvent Pump to Driver Side Washer Hose

Tip
Ensure washer hose is re-connected upon passenger side air inlet grille installation.

4

Windshield Washer Container Hose

Tip
Remove the washer hose from the large hole in behind the right front headlamp and fender assembly bracket.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the right front fender liner in order to access the washer pump. Refer to Front Fender Liner Replacement.
3. Remove the washer hose from the washer pump spout.
4. Drain the washer solvent into a suitable container.
5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
6. Open the hood.
7. Disconnect the washer hose from the driver side wiper hose.
8. Remove the washer hose from the plenum flange clips.

1

Windshield Washer Hose

Tip
Note the routing of the washer hose to the air inlet grille panel.

2

Windshield Washer Hose to Washer Pump