Preliminary Procedures

1. Remove the rear side door trim panel. Refer to Rear Side Door Trim Panel Replacement.
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.
3. Remove the rear side door inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement.
4. Remove the rear side door window frame applique. Refer to Rear Side Door Window Frame Front Applique and Front Channel Replacement
5. Remove the rear side door outer sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement
6. Position the window approximately half way down.
7. Tape the window to door frame to prevent it from moving.

1

Remove the rear side door window channel retainer bolt. Refer to Rear Side Door Window Channel Retainer Replacement.

Notice: Refer to Fastener Notice in the Preface section.

Procedure

1. Place tape around the outer edge of the rear door frame after removing the applique, this will protect the window when removing.
2. Do Not remove the rear side door window channel retainer from the door frame just the lower bolt (1).

Tighten
10 N·m (89 lb in)

2

Rear Side Door Window to Window Regulator Bolts (Qty: 2)

Tighten
10 N·m (89 lb in)

3

Rear Side Door Window

Procedure

1. Remove the tape from the door frame.
2. Remove the door window from the door frame. Pull upward then slide the window rearward to release it from rear side door window channel retainer.