GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Impala 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Rear Side Door Window Channel Replacement

Removal Procedure

    Object Number: 1650570 Size: SH

    Notice: To avoid paint damage, protect the area surrounding the part which you are removing or installing.

  1. Apply masking tape to the door frame and applique.
  2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  4. Position the window in the full down position.
  5. Remove the window channel bolt (2).
  6. Remove the window channel from the door.

Installation Procedure

    Object Number: 1650570 Size: SH
  1. Install the window channel (1) in the door.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the window run channel bolts (2).

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  3. Inspect the window for proper operation.
  4. Remove the masking tape from the frame and applique.
  5. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  6. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .