GM Service Manual Online
For 1990-2009 cars only

Front Side Door Outside Handle Replacement Impala

Removal Procedure

    Important: The outside handles have adjustable outside handle lock rods. This allows for adjustment of the amount of travel needed in order to operate the outside handle.

    When servicing a vehicle with adjustable outside handle lock rods, remove all free play between the outside handle and the lock. Also, do not operate the outside handle before these connections are made.

  1. Raise the window to the full up position.
  2. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement.
  3. Remove the front water deflector, as necessary. Refer to Front Side Door Water Deflector Replacement.
  4. Notice: To avoid paint damage, protect the area surrounding the part which you are removing or installing.

  5. Apply masking tape around the outside handle.

  6. Object Number: 1350838  Size: SH
  7. Open the outside door handle rod to lock clip located on the door lock.
  8. Remove the lock cylinder rod from the outside door handle. Refer to Door Lock Cylinder Replacement.

  9. Object Number: 1653924  Size: SH
  10. Remove the door handle bolt access tape from the inner door panel.
  11. Remove the bolts (1) from the outside handle.

  12. Object Number: 1350846  Size: SH
  13. Remove the outside handle (1) and the rod (2) from the door.

Installation Procedure


    Object Number: 1350846  Size: SH
  1. Install the outside handle (1) and the rod (2) to the door.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1653924  Size: SH
  3. Install the outside handle bolts (1) to the door.
  4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  5. Install the outside handle bolt access tape to the inner door panel.
  6. Install the lock cylinder rod to the outside door handle. Refer to Door Lock Cylinder Replacement.

  7. Object Number: 1350838  Size: SH
  8. Install the outside handle rod into the clip
  9. Close the clip cover over the outside handle rod.
  10. Inspect the outside handle for proper operation.
  11. Remove the masking tape.
  12. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement.
  13. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement.

Front Side Door Outside Handle Replacement Monte Carlo

Removal Procedure

Important: The outside handles have adjustable lock rod. This allows for adjustment of the amount of travel needed to operate the outside handle.

When servicing a vehicle with adjustable outside handle-to-lock rods, it is important that all free play between the outside handle and the lock be removed. Do not operate the outside handle before these adjustments are made.

Before removing the door handle, apply a double layer of masking tape around the perimeter of the painted surfaces.

  1. Position the window completely up.
  2. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .

  4. Object Number: 459234  Size: SH
  5. Remove the front door rear window channel bolt.

  6. Object Number: 459229  Size: SH
  7. Remove the front door rear window channel from the front door slot by pulling downward to disengage the retainer clip.

  8. Object Number: 166391  Size: SH
  9. Remove the outside door handle rod-to-lock clip from the lock.
  10. Remove the front door outside handle lock cylinder. Refer to Door Lock Cylinder Replacement .

  11. Object Number: 308317  Size: SH
  12. Remove the hole plug to access to one of the two bolts that attach the outer door handle.
  13. Remove the front door outside door handle from the door.

  14. Object Number: 459249  Size: SH
  15. Remove the front door outside door handle rod from the handle.

Installation Procedure

  1. Install the lock cylinder retainer clip to door handle.

  2. Object Number: 459249  Size: SH
  3. Install the front door handle rod to the door handle.

  4. Object Number: 308317  Size: SH
  5. Install the front outside door handle to the door.
  6. Notice: Refer to Fastener Notice in the Preface section.

  7. Install the front door outside door handle bolts.
  8. Tighten
    Tighten the front door outside door handle bolts to 10 N·m (89 lb in).

  9. Install the front door outside handle lock cylinder. Refer to Door Lock Cylinder Replacement .
  10. Install a NEW outside handle rod-to-lock clip onto the door lock lever.
  11. • Position the outside door handle rod in the clip to eliminate any free play in the outside door handle.
    • Install the clip cover over the threaded outside door handle rod.

    Object Number: 459229  Size: SH
  12. Install the front door rear window channel to the front door, ensuring that the up clip is engaged to the upper channel.

  13. Object Number: 459234  Size: SH
  14. Install the front door rear window channel bolt.
  15. Tighten
    Tighten the front door rear window channel bolt to 10 N·m (89 lb in).

  16. Install the access hole plug.
  17. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  18. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .