Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the instrument panel lower trim panel. Refer to Instrument Panel Lower Trim Panel Replacement .
2. Remove the drivers knee bolster brackets. Refer to Driver Knee Bolster Bracket Replacement .
3. Remove the passenger knee bolster bracket. Refer to Passenger Knee Bolster Bracket Replacement .
4. Remove the brake pedal nut and bolt, and pedal bracket bolts. Refer to Brake Pedal Assembly Replacement .
5. Remove the instrument panel center support bracket . Refer to Instrument Panel Center Support Bracket Replacement .
6. Remove the air distributor duct assembly. Refer to Air Distributor Duct Replacement .
7. Remove the right air outlet duct assembly. Refer to Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side .

1

Instrument Panel Carrier to HVAC Module Bolts (Qty: 5)

Tighten
4 N·m (35 lb in)

2

Instrument Panel Carrier to Body Bolts (Qty: 8)

Tighten
25 N·m (18 lb ft)

3

Instrument Panel Carrier Assembly

Tip

1. Note routing of the wiring harness to aid in the reinstallation.
2. With the aid of an assistant, remove the carrier from the vehicle.
3. Remove the defroster air outlet duct assembly. Refer to Defroster Air Outlet Duct Replacement .