Rear Seat Hinge Bracket Replacement. Chevrolet Impala 2007

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Impala 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Hinge Bracket Replacement

Rear Seat Hinge Bracket Replacement Rear Split Folding

Callout	Component Name
Preliminary Procedure Remove the rear seat back cushion. Refer to Rear Seat Back Replacement .
1	Rear Seat Back Cushion Pivot Support Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 15 N·m (11 lb ft)
2	Rear Seat Back Cushion Assembly (Qty: 2) Tip Tilt and slide outward to remove the rear seat back cushion assembly from the rear seat back hinge.
3	Rear Seat Back Hinge Bolt (Qty: 4) Tighten 15 N·m (11 lb ft)
4	Rear Seat Back Cushion Hinge Bracket