Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the lumbar actuator knob. Refer to Lumbar Support Knob Replacement .
3. Remove the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .
4. Remove the power seat switch knob. Refer to Driver Seat and Passenger Seat Adjuster Switch Knob Replacement .
5. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .

1

Cover, Seat Cushion

Refer to Front Seat Cushion Cover and Pad Replacement .

2

Pad, Seat Cushion

Refer to Front Seat Cushion Cover and Pad Replacement .

3

Bolt, Front Seat Cushion Frame (Qty: 4)

Tighten
45 N·m (33 lb ft)

4

Nut, Front Seat Cushion Frame (Qty: 4)

Tighten
9 N·m (80 lb in)

5

Reinforcement, Seat Cushion Frame Rear

6

Frame, Front Seat Cushion

Tip

1. Remove the heated seat module, if equipped. Refer to Front Seat Heater Control Module Replacement .
2. Remove the inflatable restraint passenger presence system if working on the passenger seat. Refer to Inflatable Restraint Passenger Presence System Replacement - Front .
3. Disconnect the wiring harness from the seat cushion.
4. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup .

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Disable the SIR system if working on the driver or passenger seat. Refer to SIR Disabling and Enabling
2. Remove the front seat. Refer to Front Seat Replacement - Bucket .
3. Remove the lumbar actuator knob. Refer to Lumbar Support Knob Replacement .
4. Remove the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .
5. Remove the power seat switch knob. Refer to Driver Seat and Passenger Seat Adjuster Switch Knob Replacement .
6. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
7. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .

1

Nut, Front Seat Cushion Frame (Qty: 4)

Tighten
9 N·m (80 lb in)

2

Frame, Front Seat Cushion

Tip

1. Remove the heated seat module, if equipped. Refer to Front Seat Heater Control Module Replacement .
2. Remove the inflatable restraint passenger presence system if working on the passenger seat. Refer to Inflatable Restraint Passenger Presence System Replacement - Front .
3. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup .