Caution: Refer to SIR Caution in the Preface section.

Caution: Refer to Battery Disconnect Caution in the Preface section.

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Disable the SIR system. Refer to SIR Disabling and Enabling .
3. Remove the tilt lever. Refer to Tilt Lever Replacement .
4. Remove the steering wheel. Refer to Steering Wheel Replacement .
5. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .

1

Ignition Lock Cylinder Retaining Pin Access Hole

Tip

1. Rotate the ignition lock cylinder to the crank position.
2. Use a suitable tool to depress the lock cylinder retaining pin through the access hole.
3. Release the lock cylinder the to run position.

2

Ignition Lock Cylinder

Tip
Pull the ignition lock cylinder from the steering column.