GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Impala 🢒 Engine 🢒 Engine Electrical 🢒 Engine Flywheel Installation

Engine Flywheel Installation Manual Transmission

Special Tools

J 45059 Angle Meter


    Object Number: 1608905 Size: SH
  1. Install the clutch pilot bearing.
  2. Install the flywheel/pressure plate.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the flywheel/pressure plate bolts.

    4. Tighten
    Tighten the flywheel/pressure plate bolts to 50 N·m (37 lb ft) plus an additional 70 degrees using the J 45059 .

Engine Flywheel Installation Automatic Transmission


    Object Number: 1956507 Size: SH
  1. Install the flywheel.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the flywheel bolts.

    3. Tighten
    Tighten the flywheel bolts to 70 N·m (52 lb ft).