- Clean the crankshaft balancer in solvent.
- Clean the belt grooves of all dirt or debris with a wire brush.
- Dry the crankshaft balancer with compressed air.
- Inspect the crankshaft balancer for the following conditions:
| • | Worn, grooved, or damaged hub seal surface |
| • | A crankshaft balancer
hub seal surface with excessive scoring, grooves, rust or other damage must be replaced. |
| • | Minor imperfections on the hub seal surface may be removed with polishing compound
or fine grade emery cloth. |
| | Important: In order for the belt to track properly,
the belt grooves should be free of all dirt or debris.
|
| • | Dirty or damaged belt grooves (2) |
| • | The balancer belt grooves
should be free of any nicks, gouges, or other damage that may not allow the belt to
track properly. |
| • | Minor imperfections may be removed with a fine file. |
| • | Worn, chunking, or deteriorated rubber (1) between the hub and
pulley |
