GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Impala 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Drive Belt Idler Pulley Replacement

Drive Belt Idler Pulley Replacement for Chevrolet Impala 2008

Removal Procedure

    Object Number: 1614093 Size: SH
  1. Loosen the required drive belt idler pulley bolt.
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the drive belt idler pulley.

Installation Procedure

    Object Number: 1614093 Size: SH
  1. Install the drive belt idler pulley.
  2. Install the drive belt. Refer to Drive Belt Replacement .

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the required drive belt idler pulley bolt.

    4. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).