Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the rear interior compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

1

Nuts, High Mounted Stop Lamp Assembly (Qty: 2)

Tighten
4 N·m (35 lb in)

2

Lamp Assembly, High Mounted Stop

Tip

3

Studs, Rear Compartment Inner Panel

Tip
Ensure the studs are secure to the inner compartment panel upon reassemble.