Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the hood.
2. Release the inner headlamp retainer by pulling the retainer upward in order to release the headlamp.

1

Bolt, Headlamp Assembly

Tighten
6 N·m (53 lb in)

2

Pin, Headlamp Lock

Tip
Pull headlamp from the outboard edge in order to release the lock pin from the fender flange retainer.

3

Connector, Forward Lamp Harness

Tip
Disconnect the electrical connector before removing the headlamp from the vehicle.

4

Assembly, Headlamp

Caution: Refer to Halogen Bulb Caution in the Preface section.