Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the washer hose from the washer pump spout.
3. Remove the right fender liner. Refer to Front Fender Liner Replacement .
4. Drain the washer solvent into a suitable container.
5. Lower the vehicle.
6. Open the hood.
7. Remove the passenger side wiper arm. Refer to Windshield Wiper Arm Replacement .
8. Remove the passenger side air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

1

Windshield Washer Hose to Washer Pump Connection

2

Washer Pump Hose

Tip
Note the routing of the washer hose to the air inlet grille panel.

3

Windshield Washer Solvent Pump to Driver Side Washer Hose

Tip
Ensure washer hose is re-connected upon passenger side air inlet grille installation.

4

Windshield Washer Container Hose

Tip
Remove the washer hose from the large hole in behind the right front headlamp and fender assembly bracket.