Transmission Control Replacement for Chevrolet Impala 2008

1. Remove the console. Refer to Front Floor Console Replacement.
2. Remove the console wiring harness.
3. Disconnect the console shift control wiring harness.
4. Remove the automatic transaxle range selector cable from the control assembly. Refer to Range Selector Lever Cable Replacement.



5. Remove the console shift control retaining nuts.
6. Remove the console shift control assembly from the vehicle.

1. Install the console shift control into the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the console shift control retaining nuts.

Tighten
Tighten the console shift control retaining nuts to 24 N·m (18 lb ft).

3. Install the automatic transaxle range selector cable to the control assembly. Refer to Range Selector Lever Cable Replacement.
4. Connect the console shift control wiring harness.
5. Install the console. Refer to Front Floor Console Replacement.