Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

1

Nameplate, Side Rear Quarter Panel

Important: When removing protective liners from adhesive tape backed nameplates, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.

Tip

1. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from the quarter panel, wipe the surface dry with a clean lint-free towel prior to installing the new nameplate.
2. Apply the new nameplate in the same location as shown.
3. Apply pressure to the nameplate to ensure full adhesion is made to the quarter panel.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Quarter Window Rear Applique

Important: When removing protective liners from adhesive tape backed nameplates, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.

Tip

1. Use a J 25070 or equivalent to remove the old quarter window rear applique. Clean all adhesive from the quarter panel, wipe the surface dry with a clean lint-free towel prior to installing the new quarter window rear applique.
2. Apply the new quarter window rear applique in the same location as shown.
3. Apply pressure to the quarter window rear applique to ensure full adhesion is made to the quarter panel.