GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Impala 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Rear Outer Seal Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 872463 Size: SH
  2. Pull the rear side hood seal, located at the end of the plenum to hood seal, from the fender.
  3. Remove the seal from the vehicle.
  4. Clean any adhesive from the pinch-weld flange and hood hinge using 3M™ P/N 8984.

Installation Procedure

    Object Number: 872463 Size: SH
  1. Remove the protective backing paper from the adhesive on the rear side hood seal.
  2. With the rear side hood seal butted to the plunum to hood seal, press the side hood seal until the adhesive is fully adhered.
  3. Close the hood.