Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the front seat adjuster. Refer to Front Seat Adjuster Replacement .

1

Screw, Front Seat Heater Control Module (Qty: 2)

Tighten
2 N·m (18 lb in)

2

Module, Front Seat Heater Control

Refer to Control Module References for programming and setup information.

Tip
Disconnect the electrical connector.