Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the lumbar actuator knob. Refer to Lumbar Support Knob Replacement .
3. Remove the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .
4. Remove the power seat switch knob. Refer to Driver Seat and Passenger Seat Adjuster Switch Knob Replacement .
5. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
6. Remove the front seat back cushion cover and pad. Refer to Seat Back Cover and Pad Replacement .
7. Remove the lumbar assembly. Refer to Front Seat Lumbar Support Replacement .

1

Bolt, Front Seat Cushion Frame (Qty: 4)

Tighten
45 N·m (33 lb ft)

2

Reinforcement, Seat Cushion Frame Rear

3

Bolt, Front Seat Back Cushion Frame (Qty: 4)

Tighten
45 N·m (33 lb ft)

4

Recliner Assembly, Seat Inner

5

Recliner Assembly, Seat Outer