Read the following notices before installing equipment on the specialty vehicle.

Notice: GM-approved service procedures must be followed to remove and reinstall the instrument panel to the pad in order to ensure proper airbag deployment.

Notice: Equipment mounted to the instrument panel top pad must not exceed 8.0 lb (3.6 kg).

Notice: In order not to restrict upward movement of the driver's side instrument panel top pad when the airbag deploys, equipment should be securely mounted only to the top pad.

Notice: Do not place equipment on the passenger's side of the instrument panel top pad because the edge of it rises when the airbag deploys.

Notice: Do not mount equipment on the passenger side of the instrument panel top pad deployment zone. Equipment should not be mounted on or around the passenger airbag opening because of a deploying airbag. To allow the airbag to perform as it was designed, do not mount equipment inside the airbag deployment zone.

Notice: Passenger airbag contacts inside rearview mirror at the beginning of deployment. Video cameras and other small equipment should be securely mounted outside the airbag zone.

Notice: The police vehicle has roof-rail airbags. Do not mount a security barrier such that the ends of the barrier or brackets are within the roof-rail deployment zones.

Notice: Avoid installing wiring for roof-rail emergency lighting or radio antennas that may restrict the proper deployment of the roof-rail airbags.

Notice: The police vehicle has seat-mounted side impact airbags for the driver and passenger front seat positions. Restricting the cover from opening prevents proper deployment of the seat-mounted side impact airbag. Do not cover or restrict the seat-mounted side impact airbag cover located on the outboard side of the seatback.