System
| DTCs Required to Set System Status to YES
|
If an I/M System Status indicator did NOT update to YES during the
Inspection/Maintenance (I/M) Complete System Set Procedure, review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions
that must be met for the diagnostic to run. Included within the conditions are additional DTCs which, if set, may inhibit the DTCs listed below from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will
allow the I/M System Status Indicators to transition to YES.
|
Catalyst Monitor
| DTC P0420--Refer to
DTC P0420 .
|
Evaporative Emission (EVAP)
|
|
Oxygen Sensor
|
| • | DTC P0133--Refer to
DTC P0133, P0134, P013A, P013B, P013E, P013F, P0140, P1133, P2270, P2271, or P2A00 . |
| • | DTC P0134--Refer to
DTC P0133, P0134, P013A, P013B, P013E, P013F, P0140, P1133, P2270, P2271, or P2A00 . |
| • | DTC P0140--Refer to
DTC P0133, P0134, P013A, P013B, P013E, P013F, P0140, P1133, P2270, P2271, or P2A00 . |
| • | DTC P1133--Refer to
DTC P0133, P0134, P013A, P013B, P013E, P013F, P0140, P1133, P2270, P2271, or P2A00 . |
| • | DTC P2A00--Refer to
DTC P0133, P0134, P013A, P013B, P013E, P013F, P0140, P1133, P2270, P2271, or P2A00 . |
| • | DTC P2A01--Refer to
DTC P0133, P0134, P013A, P013B, P013E, P013F, P0140, P1133, P2270, P2271, or P2A00 . |
|
Oxygen Sensor Heater
|
|
