Removal Procedure
- Remove the oil level indicator.
- Remove the oil level indicator tube bracket bolt.
- Remove the oil level indicator tube.
- Inspect the oil level indicator tube O-ring seal, for damage, replace as necessary.
Installation Procedure
- Lubricate the oil level indicator tube O-ring seal with clean engine oil.
- Install the oil level indicator tube into the engine block.
Caution: Refer to Fastener Caution in the Preface section.
- Install the oil level indicator tube bracket bolt.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
- Install the oil level indicator.