Generator Bracket Replacement for Chevrolet Impala 2009

Generator Bracket Replacement LS4

1. Remove the generator. Refer to Generator Replacement.
2. Remove the idle pulley. Refer to Drive Belt Idler Pulley Replacement.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the lower tensioner bolt and rotate the tensioner to access the generator bracket bolt.
5. Lower the vehicle.
6. Remove the generator bracket bolts.
7. Remove the generator bracket from the stud.

1. Install the generator bracket to the stud.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the generator bracket bolts.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).

3. Raise the vehicle.
4. Install the lower generator bracket bolt.

Tighten
Tighten the bolt to 50 N·m (37 lb ft).

5. Install the lower tensioner bolt.

Tighten
Tighten the bolt to 50 N·m (37 lb ft).

6. Lower the vehicle.
7. Install the idler pulley. Refer to Drive Belt Idler Pulley Replacement.
8. Install the generator. Refer to Generator Replacement.