Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Remove the left tire and wheel assembly.
- Remove the left engine splash shield. Refer to
Engine Splash Shield Replacement.
- Position a transmission jack under the transaxle.
- Remove the transaxle mount upper nuts from the transaxle bracket.
- Carefully raise the transaxle assembly.
- Remove the transaxle mount lower nuts from the frame.
- Remove the transaxle mount from the frame.
Installation Procedure
- Position the transaxle mount to the frame.
Caution: Refer to Fastener Caution in the Preface section.
- Install the transaxle mount lower nuts to the frame.
Tighten
Tighten the transaxle mount lower nuts to 63 N·m (46 lb ft).
- Lower the transaxle so the transaxle mount studs install into the transaxle bracket.
- Install the transaxle mount upper nuts to the transaxle mount.
Tighten
Tighten the transaxle mount upper nuts to 47 N·m (35 lb ft).
- Remove the transmission jack from the transaxle.
- Install the left engine splash shield. Refer to
Engine Splash Shield Replacement.
- Install the left wheel and tire assembly.
- Lower the vehicle.