- Install the crankshaft oil deflector.
Caution: Refer to Fastener Caution in the Preface section.
- Install the crankshaft oil deflector nuts and tighten to
25 N·m (18 lb ft).
Note: Do not reuse the oil pump driveshaft retainer. During assembly, install a NEW oil pump driveshaft retainer.
- Install the oil pump.
- Position the oil pump onto the pins.
- Install the oil pump bolt attaching the oil pump to the rear crankshaft bearing cap, and tighten to
41 N·m (30 lb ft).