Manifold Absolute Pressure Sensor Replacement for Chevrolet Impala 2009

1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (2).



3. Remove the MAP sensor (714) from the intake manifold.
4. Remove the MAP sensor grommet (715), if required.

1. Lubricate the MAP sensor grommet with clean engine oil, if required.
2. Install the MAP sensor grommet (715) , if required.
3. Install the MAP sensor (714).



4. Connect the MAP sensor electrical connector (2).
5. Install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .