GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Turn OFF the ignition.
  2. Remove the front floor center console. Refer to Front Floor Console Replacement.

  3. Object Number: 899225  Size: SH
  4. Remove the 2 yaw rate sensor/lateral accelerometer mounting nuts (2).

  5. Object Number: 899221  Size: SH
  6. Disconnect the yaw rate sensor/lateral accelerometer electrical connector (2).
  7. Remove the yaw rate sensor/lateral accelerometer (1).

Installation Procedure


    Object Number: 899225  Size: SH
  1. Install the yaw rate sensor/lateral accelerometer (1).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the 2 yaw rate sensor/lateral accelerometer nuts (2).
  4. Tighten
    Tighten the nuts to 6 N·m (53 lb in).


    Object Number: 899221  Size: SH
  5. Connect the yaw rate sensor/lateral accelerometer electrical connector (2).
  6. Install the front floor center console. Refer to Front Floor Console Replacement.
  7. Install a scan tool.
  8. Using the special functions menu on the scan tool, reset the yaw rate sensor.
  9. Perform the Diagnostic System Check - Vehicle.