Driver or Passenger Seat Back Cushion Heater Replacement. Chevrolet Impala 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Driver or Passenger Seat Back Cushion Heater Replacement

Driver or Passenger Seat Back Cushion Heater Replacement Impala

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the front seat. Refer to Front Seat Replacement - Bucket . Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
1	Handle, Recliner Tip Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle.
2	Knob, Power Seat Switch Tip Pull outward to remove.
3	Panel, Seat Cushion Outer Trim Refer to Seat Cushion Outer Trim Panel Replacement .
4	Cover, Seat Back Cushion Refer to Seat Back Cover and Pad Replacement .
5	Heater Assembly, Seat Back Cushion Tip Disconnect the electrical connector. The seat cushion back heater is attached to the pad with adhesive, peel away from the pad to remove.