GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Impala 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Automatic Transmission Shift Lock Control Actuator Replacement

Removal Procedure

    Object Number: 1218843 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Caution: To prevent component damage, DO NOT use metal tools to remove the trim.

    Note: Use only a plastic trim tool to lift the shift lever bezel or trim plate. Do not use any tool between the shift lever bezel or trim plate and the shifter.

  2. Remove the center console. Refer to Front Floor Console Replacement.
  3. Disconnect the automatic transaxle shift lock actuator electrical connector (1).
  4. Remove both ends of the automatic transaxle shift lock actuator from the pivot points.

Installation Procedure

    Object Number: 1218843 Size: SH
  1. Install both ends of the automatic transaxle shift lock actuator to the pivot points.
  2. Connect the automatic transaxle shift lock actuator electrical connector (1).
  3. Install the center console. Refer to Front Floor Console Replacement.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.